For instructions, please follow the tutorial by clicking here. 

The River Sections R45A & B comprise of two different pieces of 3mm MDF along with sufficient end pieces to house DIAMETER 5MM magnets (not supplied). Should the two sections be joined the length will be 12"

The gap between the raised river banks is approximately 44mm with both banks 40mm wide. Total width at either end 124mm. 

When aligned to two straight sections the river will curve through 45 degrees. 

The curves may be aligned to the left or right by placing the piece upside down before gluing on the end pieces. 

The river can be expanded to include: Bridge, Tributaries and Streams which are also available on this website.