River Sections R60B & R30B curves


For instructions, please follow the tutorial by clicking here. 

The River Sections R60B & R30B  comprise of two different pieces of 3mm MDF along with sufficient end pieces to house DIAMETER 5MM magnets (not supplied). 

The gap between the raised river banks is approximately 90mm with both banks 50mm wide. Total width at either end 190mm. 

When aligned the two pieces will make a 90 degree bend.  

The curves may be aligned to the left or right by placing the piece upside down before gluing on the end pieces. 

The river can be expanded to include: Bridge, Tributaries and Streams which are also available on this website. 

Related Products